Hangtechnika - Hangtechnikai eszközök - Audióprocesszorok

AGI-101

AGI-101

• No power-supply needed• In line connection• No extra cables needed Suppress nasty ground loops in your audio chain with this ground loop isolator. Now you can send undisturbed signals from your laptop, DVD player or other audio source through your amplifiers.Jellemzõk:Housing diameter: 35mmCable length: 280 mmTotal length: 590 mm

megvesz
PRE-101

PRE-101

• Solid housing• RIAA Equalization• High quality components The PRE-101 is a phono pre-amp with RIAA equalization. The tiny signal of magnetic pick-ups is amplified to fit the line-level inputs of mixers or USB sound-cards.Jellemzõk:Frequency Response: 20Hz-20KHz RIAAInputs: RCAOutputs: RCAInput sensitivity: 3mV for 1000 mV outputInput Impedance: 47 kOhmNominal Output Voltage: 0 dBVMax Output voltage: +16 dBuOutput impedance: 100-600 OhmsPower supply: 18V AC (adapter included)Dimensions: 40 x 113 x 80 mm

megvesz
PMM-401

PMM-401

• no power-supply needed• stereo in- and outputs• 4-in, 1out mixer• 1-in, 4out splitter The PMM-401 is a four channel passive mixer for expanding a mixer with extra line signals. It requires no batteries or other power source. The unit can be used as a 1-in 4-out box then all controls are turned completely clockwise. It is a use full tool that will help you at unforeseen situations.The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a se

megvesz
AMM-401

AMM-401

• 2 stereo inputs • 2 mono inputs • Balanced outputs• Selectable line/instrument mono inputs The AMM-401 is a 4 channel active mixer in a very compact housing. An ideal audio tool for sound engineers or musicians that often need to improvise with unknown situations. It can also be helpful to extend an USB audio interface with some extra inputs. It is a mixer in the most simplistic way with 4 volume controls for 2 stereo and 2 mono inputs. The mono inputs can be used for instruments microphones but also li

megvesz
PRE-202

PRE-202

• Switchable Phantom power• Switchabel low cut• Level control• Low noise preamps The PRE-202 is a 2 channel solution for microphones that combines a high quality low noise preamps with a 48 volt phantom power supply. It also offers gain settings and a low cut function that will help you to eliminate unwanted stage rumble. The 48-volt phantom power supply is capable of powering most any condenser microphone. The PRE-202 the ideal solution for applications where the use of normal or condenser microphones is

megvesz
ASC-202

ASC-202

• Road proof housing• High quality components• Professional balanced XLR outputs• Level control The ASC-202 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls. A possible application of the SC-13 is to use it as a level control in balanced audio lines.The DAP Pro Audio Solutions are a complete line-up of au

megvesz
AMP-104

AMP-104

• Jack TRS RCA input• Separate volume control• 2x 4 outputs• Road proof housing The AMP-104 is for expanding or generating 4 headphones channels. It has a 6,3 TRS Jack stereo input and also a RCA stereo input which makes it convenience for multiple applications. All 4 outputs have their own volume controls and the headphones can be connected at both sides of the AMP-104. This makes it also possible to connect 8 headphones, which will be operated in groups of 2 pcs.Jellemzõk:Frequency Response: 20Hz-20KHz

megvesz
ELI-101

ELI-101

• No power supply needed• XLR in- outputs• Road proof housing The ELI-101 is the perfect tool to solve all hum, buzz and ground loop problems in a professional audio chain. It is a non-powered solution which means it can be applied at all places without the need of an power outlet. It is equipped with XLR connectors which will always secure reliable connections.The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifyi

megvesz
DB Display

DB Display

Jellemzõk:Dimensions: 483 x 45 mm (LxH)Weight: 0,94 kg

megvesz
AS-8

AS-8

• Selectable splitter/mixer function• Wide range headroom• 8 inputs• 8 outputs The AS-8 can be used for several purposes. Due to its intelligent design the users can easily switch between a controllable audio mixer with several inputs, or a signal splitter with several controllable outputs. This makes the AS-8 a multifunctional solution for your own monitor mix, multi zone systems, conference applications and more.Jellemzõk:Input Connectors: XLR and 1/4" TRSInput impedance: 50 KOhm balanced, 25 KOhm unbal

megvesz
ACX-2

ACX-2

• Servo-balanced XLR Inputs Outputs• Simple and effective design• Output Mute switches• Linkwitz-Riley 24dB Octave filters The ACX-2 is a stereo 2-way ore mono 3-way active crossover. The standard 19" rugged rack mountable housing and high quality finish, good selection of high end components and great sound characteristics results in a road proof active crossover.Jellemzõk:Input Connectors: XLR Input impedance: 20 KOhm balancedOutput connectors: XLR Output impedance: 300 Ohm balancedS/N Rate (A weight):

megvesz
ACU-100 Black

ACU-100 Black

• Easy connection of your amprack• Compact size• Multifunctional The DAP ACU-100 is a professional connection unit with 2 x XLR line-in, 2x XLR line-out and Speakon speaker-connectors for Low, Mid/High and bi-amping operation. At the backside of the ACU you'll also find a 230V power outlet for the connection of a powersplitter.Jellemzõk:Length speaker cable: 1.5mLength power cable: 1.5mLength signal cable: 0.6mDimensions: 19 inch x 1U 483 x 70 x 45 mm (LxWxH)Weight: 1,5 kgPower connector not included

megvesz
ADI-200

ADI-200

• Roadproof housing with rubber feet• Low distortion• Ground lift• 20dB Attenuation switch The ADI-200 active DI box will help you with instruments that have a low level and high impedance output. It will convert the output to a more suitable signal without interfering or modifying the signal. With the ADI-200 your signal can be driven up to long cable lengths without any problems. It offers a clean and undistorted signal as well as reliability on touring stages. It works on a 9V battery or with phantom p

megvesz
PDI-200

PDI-200

• Road proof housing with rubber feet• Low distortion• No power supply needed• 0, 20 ,40db attenuation settings The PDI-200 is a two-channel passive direct injection box. It converts your HI-Z signal into a LO-Z signal. You do not need a battery or phantom power for this direct box. It has very wide applications, great for keyboard signals, acoustic electric guitar signals and any other instrument signals that need to be plugged into a snake on stage.Jellemzõk:Input: 6,3mm JackLink: 6,3mm JackOutput: XLR

megvesz
ADI-101

ADI-101

• Roadproof housing with rubber feet• Low distortion• 9V power supply ore 18-48V phantom power• Ground lift• -20 and -40dB Attenuation switch The ADI-101 is created to help professionals who haven't got the time for interference. It will protect your system for ground loops, potential hum and buzz. Because of the solide metal body and rubber feet it is very road-proof.Jellemzõk:Frequency Response: 10Hz-40KHzNoise Level: < -105db Distortion (THD): < 0.005% at 1khz, 0dbu output Inputs: XLR 1/4" Jack unbala

megvesz