Világítástechnika - DMX-es eszközök, NOD-ok

Multi Exchanger

Multi Exchanger

Convert the signal from DMX-512 to 72 CH. ANALOGUE output.• Convert the signal from MIDI to 72 CH. ANALOGUE output.• The front panel alpha-numeric display shows the DMX start address and programming options.• The last scene remains when DMX disappears.• Pre-store a scene and is available for emergency.• Memory backup with EEPROM.• CHASE function can be selected from 1 to 72 channel speed control.• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.• Receive NOTE ON/OFF signal of MIDI.Jellemzõk:Volt

megvesz
DMX Merge

DMX Merge

The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.The unit has 3 modes:1) HTP (High Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority.2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority. Once channel A fails or has no DMX channel B takes over the show.3) Merge mode. Two desks can be merged on one line. E.g. you

megvesz
RDM Commander

RDM Commander

• Built in 4*1.2V/1600mA batteries• 4*20'' LCD Display• DMX-512, DMX-1000K RDM Protocol compatible• Including flightcase RDM Commander is a testing tool for LED luminaires. It can be used to test every parameters of the DMX 512 and DMX. 1000K signals, as well as the functions of the moving heads. Meanwhile, this unit can also be used as a RDM controller. The RDM commander is including flightcase and power adapter but can also be operated wireless due to the built-in accu.Jellemzõk:Operating voltge: 9VDCP

megvesz
DB-1-4

DB-1-4

• DMX splitter for 4 outputs• Electrical isolation between in and output• DMX Indication LEDs on in- outputs• 3 5P XLR in- outputs• M10 nut at backside for truss clamp The DB models from Showtec are universal DMX-512 optical splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional -Tru" port. They can be mounted in any 19" rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to sho

megvesz
DB-6-RDM

DB-6-RDM

• DMX Booster with RDM communication• Every RDM output features and independent driver• 19" rackmountable The DB-6 RDM is a 6 channel DMX distributor. It offers full RDM functionality and can be used both with standard DMX and RDM protocols.Jellemzõk:Power Input: AC 230V 50HzPower consumption: 5WHousing: Metal with powder finishingData in/out: 3-Pin/5-Pin Neutrik XLR ConnectorCommunication: DMX ore DMX+RDM (switchable)Protocols: RDM, DMX-512 (1990)Dimensions : 482 x 145 x 44 mmWeight: 2 kg

megvesz
DB-1-8

DB-1-8

• DMX splitter for 8 outputs• Electrical isolation between in and output• DMX Indication LEDs on in- outputs• 3P XLR outputs• M10 nut at backside for truss clamps The DB models from Showtec are universal DMX-512 optical splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional -Tru" port. They can be mounted in any 19" rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the D

megvesz
DR Pro Rack

DR Pro Rack

• 128x160 Pixels, color LCD display• 8 Memories for scenes, chases or shows• Manual control, Real-time trigger, SMPTE/MIDI time code trigger, DMX trigger and DMX monitor• 5 Hours internal recording time• 4 Recording modes, Manual, Auto, Semi-Auto Smart The DR Pro Rack is a useful tool to store DMX values of complete Scenes, Chases or Shows. The total record time is 5 hours shared over the 8 memories. The basic functions are easy to control with the direct playback buttons at the front which makes it idea

megvesz