Jellemzõk:Height: 905-1600 mmArm Length: 580-900 mmBase: MetalTwo section boom-arm.Ergonomic rubber grips
Complete ready to use mic set 6M XLR Cable Microphone with on/off switch D8301 Microphone stand The MS-3 microphone set is a complete microphone set for starters. It includes a dynamic microphone with on / off switch, the D8301 stand with flexible microphone clamp and a 6m Cable. It is a very affordable set which is ideal for schools, musicians and mobile Dj's.Jellemzõk:Microphone stand: D8301Cable: XLR male / female 6MClamp: Flexible rubberMicrophoneSwitch: On / Off Element: Moving Coil DynamicPolar
Complete ready to use mic set 6M XLR Cable Stand with metal base part The MS-4 microphone set is a complete microphone set for professionals. It includes a dynamic microphone, a telescope microphone stand with metal base, flexible rubber microphone clamp, 6m Cable and a bag. This set is a ready to use solution for on stage use.Jellemzõk:Element: Moving Coil DynamicPolar pattern: CardioidFrequency response: 50Hz - 16KhzOutput impedance: 500 Ohm (1 KHz)
This microphone stand is ideal for practice and home use.Jellemzõk:
The Gig stand adapter comes with two 5mm screws needed for mounting on Gig-62, Gig-83CFX or Gig-104C mixers. It has a 5/8 thread which makes it easy to assamble the adapter on any microphone stand. Make sure to use stable mic stands and tighten the angle adjustment screw to avoid the unit tipping over.Jellemzõk:Measurements: 130x85x45mmWeight: 0,270KgThread: 5/8
Superlux DS01 Microphone Table Stand mikrofon állvány: 3 lábú asztali mikrofon állvány, stabil fém konstrukció, műanyag lábvégek, 9 cm magasság, súly: 0.1 kg, fekete szín
Jellemzõk:Height: 570 - 980 mmArm Length: 400 mm (diameter 28 mm)Material: SteelMax load: 30 kgEasy locking and height adjustable system.For small / medium keyboards.
Get those stands organised with this straightforward solution from DAP. The stand-bag provides an affordable way of carrying your hardware.Jellemzõk:Dimensions: 1100 x 230 x 150 mm (LxWxH)
6-10 inch universal fit Flexible H/V position adjustment Table clamp, foot plate, microphone stand clamp max height 240mm The DAP Multifunctional Tabled Stand is a one-in-all solution for tablets. Due to the 3-way adjustable holder with rubber grips it fits many types of tablets from 6-10 inches. The holder is connected on the accessory by an mechanism with 2 ball joints. This makes it possible to adjust it easily in any position horizontal or vertical. There are 3 accessories included, table clamp
Height could be adjusted Can be fixed or locked on the table Material: Metal Excl. MicrophoneJellemzõk:Microphone Cable attachedBalanced and shielded cable, XLR connectorMicrophone and shockmount not includedDimensions: height adjustment 1650 - 2200mmWeight: 9,2 kgMinimum microphone weight: 0,4 Kg (counterweight spring)
The Antenna Booster creates more flexibility for your Eclipse range wireless microphones. It boosts the signal so that it is possible to extend the range of use of your microphone. It improves the S/N ratio and protects your signal for interference. It can be mounted on the wall or on a normal microphone stand. This antenna booster only works in combination with the power supply of the antenna distributor D1444.Jellemzõk:
4 light modules controlled via controller Controller either sound-controlled, stand alone, or via DMX Sound-control via built-in microphone Microphone-sensitivity adjustable via rotary-control Advantages of LED technology: long life, low power consumption, minimal heat emission, defacto maintenance free with brilliant light radiation The ideal effect for party rooms, hotel bars etc. DMX-interface included in the delivery Program-run, color-changer, strobe via DMX controller
Operable in stand-alone mode or via DMX interface DMX512 control possible via any commercial DMX controller (occupies 5 channels) Stand-alone mode functions adjustable via DIP switches Sound-control via built-in microphone Color change speed and strobe effect adjustable via DIP switches Functions: Static colors, RGB color blend, internal programs, dimmer and strobe settings via DMX, Master/Slave Equipped with 126 x 10 mm LEDs
Operable in Stand-Alone Mode or DMX interface DMX-512 control possible via any commercial DMX-controller (occupies 5 channels) 3 or 5 DMX channels selectable for numerous applications Sound-control via built-in microphone Adjustable microphone sensitivity via LED display Comfortable addressing and setting via control panel with LED display and three operating buttons Functions: Static colors RGB color blend, internal programs, Dimmer and Strobe settings via DMX Master/Slave Equipped
The DAP microphone DM-20 handles extreme low-frequency volume levels and is specially designed and tuned to capture the low punch of low-frequency instruments like kick-drums or bass-amps. With integral stand mount.Jellemzõk:Type: Dynamic, moving coil.Polar pattern: Super Cardioid Freq. response: 20 to 12.500 HzSensitivity (1000 Hz): 2,2 mV/Pa* (*1 Pa = 94 dB SPL)Max. SPL: 134 dB (THD ? 1% 1000 Hz)Impedance: 500 OhmPower supply: noneConnector: 3p. XLR (male-type)Accessories: Treat adapter 5/8, 4/8, 3/8 In
Jellemzõk:Height: 415-660 mmArm Length: 580-890 mmBase: MetalTwo Section boom-armErgonomic rubber grips