Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms
Stereo PA amplifier with class D circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Housing design: (19 ) 48.3 cm rack installation 2 U
Power supply:
110-240 V AC, 50/60 Hz
Power consumption:
200 W 1/8 power
Power/channel (4 Ohm):
1250 W
Frequency range:
20 - 20000 Hz
Power connection:
Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided)
Number of channels:
2
Housing design:
(19 ) 48.3 cm rack installation 2 U
Width:
48,3 cm
Height:
8,9 cm
Depth:
30,7 cm
Weight:
6,25 kg
Power output (RMS):
Stereo, parallel at 8 ohms
2 x 700 W
8 ohms bridged
1 x 2500 W
Signal-to-Noise ratio:
>100 dB
Total harmonic distortion:
<0.15 %
Damping factor:
>500
Voltage gain:
39.7 dB
Slew rate:
>10 V/ sec
Input sensitivity:
0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable
Input impedance:
20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:
4 x XLR
Output connectors:
4 x Speaker, 4 x XLR feed-through output
Circuitry:
Class D
Protection:
Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals
Cooling:
2 temperature-controlled fans, front-to-rear
Controls:
Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:
protect, clip, - 5 dB, - 10 dB, - 20 dB (per channel)
Construction:
steel chassis, aluminum front
Rack installation with 2 U
With CEE-plug and CEE-connector 5 x 16 A Cable H07RN G2.5
With CEE-plug and CEE-connector 5 x 16 A Cable H07RN G2.5
With CEE-plug and CEE-connector 5 x 16 A Cable H07RN G2.5
Németországban készült Kimeneti csatlakozó (tápellátás): 3x biztonsági csatlakozó Súly: 0,419 kg
With CEE-plug and CEE-connector 5 x 16 A Cable H07RN G2.5
Heavy rubber coating with rubber safety plug and 3-fold connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 2.5 mmsup2; Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and 3-fold connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 2.5 mmsup2; Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and connector H07RN-F quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and 3-fold connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and 3-fold connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
Heavy rubber coating with rubber safety plug and 3-fold connector H07RN quality for permanent outdoor use 250 V/16 A with 3 x 1.5 mmsup2; required cross-section Not comparable with do-it-yourself providers
/A leírás: Fordítás!/ Hibája, hogy egyik oldal nem működik, javításra szorul! A kép illusztráció! Nem az eladandó termékről készült! PSSO bejegyzett védjegye és áll a Professional Sound Solutions által Omnitronic. A termékeket gondosan válogatott a tapasztalt termék fejlesztők és csak a legjobb minőségű gyártók állandó minőség-ellenőrzés. A termékcsalád a professzionális audio eszközök lettek kifejlesztve kölcsönzés, rendezvény ügynökségek vagy üzemeltetői nagy klubok. PSSO termékek a technológia